Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and upvc Window Repairs long-lasting. They don't rot or rust like timber and aluminum.

It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you plan to attempt to remove the glass panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any shards fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and repair the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is large, you may be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. Over time, they can develop a number of problems such as sliding. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows so you can reach the frame. After that, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it can also be due to the mechanism of the handle wears out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. You'll first need to close the window and do an experiment fitting. The corners of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. Windows that leak water do can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease It could be the hinges that are at fault. These are easily replaced by any competent DIYer and can be completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It's very simple to change the hinges on a window, uPVC window repairs but it's simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to provide assistance.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause an opening to appear where the sash joins the frame. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them aligned or replaced. The interlock may also become misaligned. It is located on the hinge's side, and might require to be cleaned. In some cases, it may be necessary to replace these.

The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the upvc window repairs with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be positioned on the top of your windowsill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as you can.