Choosing uPVC Replacement Window Handles

Most customers agree that these upvc replacement windows near me window handles are easy to install and feel as good quality. However, it's important to know that the kind of handle you pick should be appropriate for your window.

The most important aspect is the step height, which refers to the gap beneath the nose of the handle to the base or frame. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There are a wide range of replacement window handles made of upvc available for purchase. They come in a variety of colours and styles so there's bound to be something that will fit your windows. It's easy for you to purchase a product on impulse particularly when the handle is damaged. Therefore, it is best to do some research before purchasing the replacement. First, you need to know what type of upvc handles you have and what the differences between them. The table below lists the most common handles to help you find the right one to suit your window made of upvc.

Espag handles are the most commonly used and are used on the majority of modern double glazed windows. They are typically attached to the frame using two screws that are screwed in from both above and below.

The spindle bar on the back may be of different sizes, and will determine whether they are left-handed or right-handed. It's important to take the measurements of the handle you currently need to ensure you order the appropriate replacement.

The arm is attached to the frame by two bolts, just like the Espag handle. However, the handle has a low projection so that it doesn't damage your blinds. This is a great option for those who want the handle to blend in with your blinds and have windows made of upvc.

Cockspur handles are similar to Espag handles, but they have a nose that is closed over a wedge that rests on the frame of the window. This kind of handle can be commonly found on older upvc windows as well as some wooden windows.

On casement windows tilt and turn handles are operated by turning the handle or pressing the top of the window. The window is opened from the inside and allows you to clean the outside without having to go out on a ladder or step over the fence. These are ideal for those with limited mobility, and can enhance security and access to the home.

Tips and tricks

Many people will have to replace their uPVC window handles at some point. It is essential to know some tips and tricks that can make the job easier.

The first thing you should do is determine the type of handle you have at home. Based on the type of handle and the locking mechanism, it may be necessary for you to replace the handle and lock. For instance, if the shoot bolts (espag) and roller cams are jammed or seizing and sizing, you'll have to replace them as well as the handle itself.

Thankfully, the majority of uPVC handles are identical and uPVC Replacement Window Handles conform to industry standards for sizes, making replacing them a fairly simple process. First, remove the screws on the handles. These are usually pozidrive screws. After these screws are removed, you are able to remove the handle.

It's a great idea to note how much the spindle sticks out from the base of your handle when you separate it. This will allow you to measure the spindle length for an alternative handle. To do this, measure the amount of the square peg sticking out from the top of the handle, and use it as a reference.

This is especially important for inline uPVC handles for windows, since they are always straight and will only open to the left or right. They won't work in the middle. It's a good idea if you're not sure of the kind of handle you have at your home to borrow a handle to see how it functions.

You can also determine the hands of a uPVC window by observing how the handle spins when it is in use. Handed handles can turn either clockwise or counter-clockwise. If you aren't sure you are, ask someone else to open the window using the handle and observe how it functions.

Take a measurement of the spindle

The selection of the right replacement handle for your windows can be a bit difficult since not all handles are the same size. It is crucial to measure the spindle accurately when installing the new handle. This will ensure that the handle fits. There are a variety of uPVC handles that function in different ways. It is crucial to identify the type you have, and what locking mechanism you have.

The spindle of the Espag handle is a part that extends from the rear of the handle and then into the lock gearbox that is within the window frame. When you turn the handle this turns the lock inside the gearbox and opens the window. They are usually used on uPVC casement windows and they can be locked with keys to give extra security.

Cockspur handles feature an "nose" that is closed over the striker block in a wedge shape on the frame. They are typically found on older double-glazed uPVC windows. They are also quite simple to use and can be locked with keys. It can be more difficult to replace these handles because they are not as popular as the espagnolette handles.

If you own a tilt-and-turn uPVC then you'll need a replacement handle with an alternative locking system. The handle can tilt the window, and allow it to be turned back and forth to fully open it. You should select the handle with an opening of at least 55mm in order to be able to reach the window frame.

You can follow the same procedure to take off and replace this kind of uPVC handle, but you'll need to be cautious when you remove the old one. It is possible to open the window a bit larger than usual to ensure that you can access both screws that attach it to the frame. After you have installed your new uPVC handles and checked that they are in the proper position, you can tighten up the screws and check to make sure the lock is working correctly.

Fit the new handle

Once you have the correct handle replacement, it will simply screw into the right place. It will require a screwdriver and an electric one may be a lot easier. When screwing the screws in, it is important not to over tighten the screws because this could cause the handle to break or warp.

Inserting the spindle is the next crucial step to install the new handle. The spindle is the component which runs through the handle to operate the locking mechanism inside the window. It is crucial that the part fits correctly to permit the window to open and closed securely.

There are several different types of uPVC window handles. They include:

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles - these are similar to the inline handle but have a curvaceous design that can be useful for windows in hard-to-reach locations.

Tilt and turn handles - They are used on tilt and turn windows to control the closing and opening mechanisms.

They are the most popular and the majority of uPVC windows have these in the first place. In the UK, they are commonly known as "Bay Windows".

If your uPVC window handle is broken it can be very frustrating. However, there is no need to replace the entire uPVC windows because of a damaged handle. There are many simple steps that can be taken to repair and replace a broken uPVC window handle.

You can fix your broken window handle fast by identifying the type and determining the spindle. When working with windows and tools it is essential to put safety first. However this is a fairly easy task. It could make the difference between a secure and safe home or an insecure easily opened window! Bridgewater Glass is the place to visit if you have any questions or would like to speak to an expert regarding replacing your window handle. Our team is experienced and knowledgeable to help you with any issues.