Choosing uPVC Replacement Window Handles

The majority of customers agree that upvc replacement window Handle handles are easy-to-install and feel comfortable. It is important to be aware that the handle you choose for your window must be suitable for the window.

The step height is the most important factor. This is the distance between the handle and the frame, or base. Other factors to consider are lockable styles and mechanisms.

Replacement parts

You can purchase a variety of replacement handles made of upvc. There are a variety of styles and colors to choose from, so you're sure to find one that will match the windows replacement you have. It's easy to impulse buy, particularly when the handle is damaged, therefore it's a good idea to look over certain things prior to committing to purchasing a new one. First, you need to be aware of the type of handles made from upvc you have and what the differences between them. The table below lists the most commonly used handles to help you identify the one that will fit your windows made of upvc.

The majority of double-glazed windows come with epag handles. They are usually attached to the frame using two screws that are screwed in from both above and below.

The spindle bar at the back could be of different sizes, and can determine if they are left-handed or right-handed. This is why it's important to measure the current handle to ensure you're getting the right replacement.

Usually, they are fixed with two bolts, similar to the Espag handle but they have a lower projection from the frame which means that the arm will not penetrate your blinds. This is a great option when you want the handle to blend with your blinds and windows made of upvc.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge that rests on the frame of the window. This type of handle is available on a few older wooden and Upvc windows.

On casement windows, tilt and turn handles are operated by turning the handle or pressing the top of the window. This lets you open the window replacement from inside and clean it from outside, without having to climb a ladder or step across the fence. They're also a great option for those who have limited mobility, and can increase security and Replacement Window Handle accessibility in the home.

Hints and tips

There are a number of different types of uPVC window handles, and a lot of people will find themselves replacing them at some point. It is important to know a few tips and tricks that will help you make the task easier.

The first thing you should do is determine the type of handle you have at home. Based on the kind of handle and the locking mechanism, it might be necessary for you to replace the handle and lock. If the roller cams or shoot bolts (espags) are jammed, or seizing up, you'll have to replace them along with the handle.

Fortunately, the majority of uPVC handles are similar and follow industry standard size, which makes replacing them a fairly simple task. First, you must remove the screws that cover the handles. These are usually pozidrive screws. After the screws have been removed then you'll be able to take apart the handle.

It's a great idea to note how much the spindle protrudes from the base of the handle after you take it off it. This will help you measure the length of the spindle to determine a replacement handle. To do this, take a measurement of the square peg that sticks out from the base of the handle and use that as a reference.

This is particularly important for inline uPVC window handles since they'll always be straight and can only open either left or right, and will not operate in the middle. It's a good idea if you are not sure what type of handle you have at your home to borrow a handle to see how it functions.

Another excellent method to figure out what the handed of the uPVC window handle is to look at the way the handle turns when operating. Handed handles will turn either clockwise or counter-clockwise. If you're unsure it's possible to have someone else open the window using the handle, and figure out how it works in that way.

Measure the spindle

It can be difficult to pick the appropriate replacement handle for your window as not all handles have the same dimensions. It is crucial to measure the spindle accurately when fitting a new handle. This will ensure that the handle fits. There are several different types of uPVC window handles, and they work in different ways, so it is essential that you know which kind of handle you have as well as the type of locking system you have.

The spindle of the Espag handle is a part that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle it turns the lock inside the gearbox, and opens the window. They are installed on uPVC windows with casement. They can be locked with keys to provide additional security.

Cockspur handles feature an "nose" that is closed over a wedge-shaped striker block on the frame and they are typically found on older double-glazed uPVC windows. They are also relatively simple to use and can be locked using keys. It is more difficult to replace these handles since they are less common than the handles with espagnolette.

If you have an open tilt and turn uPVC window, then you'll need to get a special kind of uPVC replacement handle that comes with an entirely different locking mechanism. It can tilt the window open but also rotate it back and forth to open it fully. You will need to ensure that the handle you select has a spindle size at least 55mm, or it won't be able to get into the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will need to take care when you remove it. You may need to open the window a bit larger than usual to ensure that you can reach both screws that are fixing it to the frame. Once you have put in your new uPVC handles and verified that they are in the correct position, you can tighten up the screw covers and check to make sure the lock is working correctly.

Install the new handle

Once you have the correct handle replacement, it's going to be easy to screw it into the correct position. This will require a screwdriver, but might be easier using an electric one. It is crucial not to overtighten the screws when screwing them in. This could cause the knob or handle to warp.

The second step in installing the handle is to put in the spindle. It is the part that is inserted into the handle and is responsible for operating the locking mechanism within the window. It is vital that it is fitted correctly, as this will ensure the window can be shut and opened securely.

There are a myriad of different kinds of uPVC handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved design which is ideal for hard-to reach windows.

Tilt and turn handles - They are used to operate the opening mechanisms and closing mechanisms when tilting and move windows.

These are the most common and the majority of uPVC windows have these in the first place. They are commonly called 'Bay windows' in the UK.

It can be frustrating If your uPVC handle breaks. There is no need to replace the entire uPVC window because of a broken window handle. There are several simple steps that can be taken to repair or replace a broken uPVC window handle.

You can fix your broken window handle quickly by identifying the type and determining the spindle. It is essential to be patient and ensure security when working with windows and tools, however, this is a simple task. It can mean the difference between having a secure and secure home or a window that can be easily opened. If you have any concerns or want to talk with a professional regarding replacing your window handle, contact Bridgewater Glass. We have a team that is experienced and knowledgeable to assist you with any issue.