ghost vehicle immobiliser 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from key cloning or hacking is a small device that can be put in place without causing any damage to your vehicle. It prevents your vehicle from starting unless you press a specific sequence of buttons within your vehicle, similar to a password on a mobile phone.

Stop/Start

Ghost Immobiliser London immobilisers prevent vehicles from being stolen by preventing the engine from starting until it is issued the correct PIN code. This is done without altering the vehicle, and is largely undetectable by thieves. The unit communicates with the ECU via the CAN data bus, which allows it to lock the vehicle. This is similar to the one used by car makers for many years. However, thieves cannot escape it using a new key, or key relay technology, as they could using factory-installed systems.

Ghost is compatible with all vehicles with an engine, including motorhomes, cars, vans, caravans, and bikes. The same system can be utilized on electric vehicles. It's a great alternative to steering wheel locks and wheel clamps and can be installed with a minimum of effort.

If the Ghost is activated it will block all buttons in your car, preventing the ignition being started without a PIN code. This can be done via the Android or Apple mobile apps or by manually entering the code through your key fob. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent, and when the vehicle isn't started the thief will then move on to a different area of.

The Ghost is small weatherproof device that can be hidden in the most difficult to access areas of your car. It is extremely simple to install and takes an average of 20-30 minutes per vehicle. It is also very easy to remove should you choose to change your vehicle or hand it in for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system that is recognized by some insurers. It also features an emergency lock that is secure Pin Code Override, and the Service/Valet feature that can be activated by pressing a button on the app or using your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which are able to be removed Ghost immobilisers are hidden and integrated into the car. Even if they were to be found in the car, thieves wouldn't be able to start the vehicle. They are virtually impossible to bypass or hack. Ghost immobilisers are able to prevent key cloning, as well as devices spoofing signals and signal jamming. These are methods that thieves employ to gain entry into cars that have standard immobilisers.

An immobiliser works by sending an instruction to the ECU (electronic control unit). If the incorrect code is received and the vehicle does not start as the engine won't start. While it is possible to disable the ghost immobiliser using a software tool it is time-consuming and difficult. Only an authorized installer can install and use the software.

The Ghost immobiliser is a tiny device that is part of the wiring loom of your vehicle and is inaccessible to the naked eye once installed. It is not visible on diagnostic systems. There are no LED indicators, and it doesn't communicate with the engine via the OBD port. It communicates in a silent manner through the CAN data circuit.

The system won't allow the vehicle to start unless it receives an input PIN code defined by the user. This code is entered using buttons on the steering wheels, door panels, or central console. This is a safer way to protect your car as it does not require the use of keys or a remote control.

Ghost also has a service mode that can be activated via the mobile application. This lets you give your keys to someone else for valet parking or service, without the need to enter an arm-disarm sequence.

No matter if your Ghost is in service mode or not, you should never attempt to remove the system yourself because it could affect the engine and cause damage. It is recommended that you contact an TASSA certified installer who can remove the system safely and properly. Our newest GHOST II immobilisers also come with the QR fingerprint stickers that is hidden in various areas of your vehicle. these are linked to our international security register. In the event that the system is removed and is sold on the black market, this will connect it back to the original owner.

Anti-Hijack

The anti-hijack feature is a key feature of the Ghost Immobiliser 2. This is a clever key that protects your car from theft. Whenever the ignition switch is turned to on, and the car is stationary for 30 seconds and the Ghost system will stop the engine and turn the warning lights on. This gives the driver and passengers enough time to press the secure button before the system is reactivated.

The Ghost system, unlike many competitors, has a timer and controller unit that shuts off the valve for shut-off of fuel 14 after a predetermined time. This happens regardless of whether the ignition is on. The delay period must be sufficient to allow the owner of the vehicle to get away, and a distance sufficient from the car that it is stuck before the system is reactivated.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it comes with an additional security level that blocks common hacking methods used to gain access to modern vehicles, such as relay attacks, key range extending and ECU swapping. This is due to the fact that the Ghost system communicates in a quiet manner and does not emit signals that could be detected by a thief using codes or RF scanning technology.

The Ghost system also has a Service / Valet mode that allows your vehicle to be temporarily re-started and driven without the requirement of a PIN code. This is a great option if you park your car and only need to leave it briefly, such as to open the garage door or place groceries in the boot. The system will end the service mode based upon the speed and duration, or via the simple input of a PIN code process. This gives you total security that only YOU can drive your vehicle!

Keyless Entry

Many customers are now looking for extra security measures due to the increasing trend of contactless car theft. This is particularly relevant for those who have invested time or money into personalising their vehicle or own expensive vehicles. An add-on immobiliser can be an effective way to avoid this type of theft as it will stop your vehicle from starting until the right pin code is entered on your key fob.

Immobilisers are made to block a variety of vehicle circuits, including those that control the starter motor and fuel pump. They can also shut off the car stolen with ghost immobiliser alarm to draw attention and ward off potential thieves.

These devices are directly connected to the engine control unit through the CAN data network and hinder thieves from gaining access to it by installing a new ECU or using key programmers. These immobilisers are installed discretely inside your vehicle, leaving no trace and are totally inaccessible to the tools high-tech thieves employ.

The Ghost immobiliser is unlike other systems which require drivers to carry an app or tag. Instead, you are able to choose your own pin sequence by pressing an image on your door, steering panel, and centre console. The pin can be changed as frequently as you like, meaning it's as secure as a credit card, and is even more difficult to break because it requires at least 20 presses.

Ghost also comes with a Valet/Service mode, which allows you to deactivate it if you plan to give your vehicle for valet parking or service. This allows the system to operate within parameters, such as a 30-mph speed limit. It can then be reactivated by using the original key or key that corresponds to the entry code.

Installed by our certified installers, it is the most secure and effective aftermarket CAN-immobiliser available. It is also approved by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels and an ISR contact cards containing the unique QR codes as well as an emergency code that is secure. All of these are kept in your purse or wallet.