Caboose - A Very Small Wood Burner

The Caboose is an Ecodesign and DEFRA approved log burner, that can burn wood and smokeless fuel. It can take larger pieces of wood than most tiny stoves and boasts a remarkable burn time and heat output.

The wood stove may be shielded by heatshields to meet the requirements of Approved Building Document J, which states that wood stoves should be kept at least 150mm away from surfaces that are combustible.

Clean Wood

Wood stoves look stunning, but they're also a great way to warm your home. Therefore, they have to be looked after properly to ensure that they run smoothly and efficiently. It is sometimes a challenge to keep the glass clean. However, a few simple steps can make a significant difference.

It is essential to only burn wood that has been seasoned in your wood stove. This means that it must be cut and stored for at minimum a year prior to use to help to reduce smoke output. Wood that is not properly seasoned can cause the flue to overheat and cause an explosion that is out of control.

You should also burn clean wood in your wood-burning stove. Avoid burning paper or other non-Best wood burning stoves products like rubber or plastics, as they can emit toxic fumes that are bad for your health. Do not burn treated or painted wood, since this can release dangerous chemicals like arsenic into the air that is not good for you.

You should also clean the inside of your stove frequently. It can be done easily using a regular household vacuum cleaner as well as a brush attachment. You can also buy a variety cleaners that are specifically designed for use on stove glass. However it is crucial to make sure any product you use does not invalidate the warranty of your stove before using it.

Finally, it is important to inspect regularly the fire rope seals on the doors at the top and bottom of your wood burner. These seals prevent smoke or soot from the stove. It is essential to ensure that they are properly installed and not worn out.

Another thing to remember is to remove every so often any birds that have a nest on your chimney. Seagulls can be a problem since they tend to be a nuisance to chimneys during summer. This could cause all kinds of debris to be deposited into the flue, which can damage your stove. You can install a variety of bird guards and spikes to your chimney to prevent this.

Paper Burning

Burning paper is a simple method to get the fire going, but the wrong kind of paper can cause dangerous smoke. Some types of paper, such as glossy magazines and giftwrap, contain harmful chemicals that release toxic fumes when they burn. Only burn clean paper in your wood stove to avoid creating a hazardous environment.

If you have only a few pieces of paper to burn, think about using a tub. Set a stack over the tub and then light the corner wood burner. The water will smother the embers and prevent them from setting fire to nearby grass or trees. If you are concerned about the smell of burning paper, you can place a bowl of baking soda or vinegar close by to neutralize the smell.

Start with a base made of small twigs, or newspaper that has been shredded. This will ensure that the newspaper burns in a proper manner. Then, add 3-4 medium-sized wood logs to the fire and let them begin to burn. Then, place the paper on top. The paper will quickly burn, so you should monitor the fire closely.

It is recommended to pick a wind-free day to burn paper outdoors. A strong wind gust could cause embers to fly into your home or into the grass. Inhaling the smoke from burning paper can also cause breathing problems.

You can also employ the BBQ grill to burn paper, however this method is ideal when you only have a couple of sheets of paper to burn. If you have a grilling surface, you can remove it and burn the paper directly on the charcoal.

Before you start burning paper, make sure that your wood burner has been thoroughly tested and that the firepit is free of any twigs or branches. In case there is an emergency, it's an excellent idea to keep a fire extinguisher in the vicinity. Also, consult with your county government as well as your homeowners association to ensure that it is legal to burn paper outside in your area.

Safety Precautions

Wood-burning stoves can provide hours of comfort and pleasure, but that joy is only achievable if you take the practical steps to use them safely. Although it may seem simple to some, the fact is that all too many people don't take the time to adhere to simple safety precautions.

Make sure your stove is properly insulated, and that any flue pipes running outside are well-protected. You will also want to make sure that children and pets are kept away from the stove.

Make sure that no trash or paper is left in the firebox. The burning of these items can cause the fireplace and chimney to overheat. They can also produce creosote, a fire hazard that needs to be cleaned regularly.

Make sure to check the smoke alarms and test them every month. In addition, it's recommended to install carbon monoxide detectors, which can save lives and are inexpensive.

Always keep a fire extinguisher within reach in case in the event of an emergency. Always burn only dry, seasoned logs and don't build a stack of logs that are too large. Burning a large wood burning stove pile of logs will result in a lack of combustion, which can lead to increased CO emissions. It is also important to keep an eye on the fire and if it becomes out of control, put it out it quickly.

After you have finished using your stove, be certain that the fire has been put out and that all combustible items have been cleared from around the flue pipes and the firebox. There are specific clearance requirements based on the stove's model and on how you plan to install it in your home.

Consider using a DEFRA approved model if you plan to install your wood-burning stove in a controlled area. These stoves are designed to work in smoke controlled areas and are available in a variety of sizes and colours. Some models can be customised to match your style and include a direct air intakes designed for better performance in smoke controlled zones.

Installation

Wood stoves are a very popular choice for heating small areas. They can be utilized in sheds, yurts, and even cabins. In addition, they create a warm and cozy fire without using electricity or oil. It is crucial to follow the installation guidelines provided by the manufacturer to set up your wood stove in a safe and efficient manner. These instructions will help you avoid potentially dangerous problems, and ensure your stove is safe to use.

Before installing your stove, clean the area around it of combustible material. Also, you should leave at minimum 16" between the stove and the nearest walls that are combustible. If you do not meet these requirements, a stoveboard or hearth pad could be installed. This non-combustible mat will come with spacers of 1" to allow the stove to sit further away from the walls, which can reduce clearance requirements by as much as 66%.

To prevent smoke from blowing back into the room, also remove combustible items like curtains and furniture. Install a carbon monoxide alarm in your shed. The last thing to do is ensure that the shed has adequate ventilation. It is important to regularly inspect your stove and chimney to ensure safety.

It is recommended to buy wood stoves that are EPA certified. This certification indicates the stove is more than 75 percent efficient. It means it will absorb and convert a greater amount of heat from the wood. You should also select the right wood stove based on the recommended heating capacity for the room in which it will be installed. This will ensure that you do not risk over-loading your stove, which can cause creosote buildup and smokeouts.

After you have cleared out the space and removed all combustible material, you will need to build the foundation for your stove. This includes removing any combustible materials and making the hearth ready. You should also check for any existing vents to ensure they are open and clear. If not, you'll require new vents.

After you have installed your stove, you should test its capabilities by lighting three or four small fires. This will allow you to dry the fire bricks and paint on your stove. It will also make sure that it is safe to use large flames.