How to Replace a Subaru Key Fob

Subaru Foresters, Outbacks, and Crosstreks are equipped with a clever feature that allows you to lock your vehicle and leave it in a safe place. This nifty feature lets you lock your car and leave it in a safe place.

It's possible to buy the replacement Subaru key fob from a hardware store or online. You can also visit a Subaru dealer for more customized service.

How to Replace Your Subaru new key fob cost Key Fob

If you've lost your key fob, or simply want to replace its battery, a few easy steps can help. Make sure you have a screwdriver and a battery replacement ready (ideally CR2032 3-V). The key fob could require a spudger tool in order to remove the case from the circuit board. Before you attempt replacing it ensure that you have read your owner's manual to ensure that you have the proper battery type for your vehicle.

Next, press the small silver button on the back of your Subaru key fob to release and pull out a steel key. Place the screwdriver's tip into this slot to open the gap between the front and back of the key fob's body, giving you access to its internal components. Remove the metal key, and then use your screwdriver to break off the housing that houses the control module. The housing houses the battery.

Once the housing has been removed take the flat round battery inside. The battery should be easily visible as it is held by tiny tabs. Remove the battery from its tiny tabs and replace it with your new one, making sure that the number is facing upwards. Reassemble the key fob and test it for function. When you press the lock on your key fob your car will usually chime.

Why Go to a Dealership to purchase a Key Fob replacement?

spare subaru key key fobs are easy to lock and start your vehicle remotely. However, as with any electronic device they may break or become obsolete. There are a number of options available for replacing subaru key your Subaru's key fobs Bartow or Lake Wales.

First, check the type of fob you have. The older models that have a physical key in the inside are more teardrop-shaped while the latest models have a bulging rectangular. Open the case to expose the battery and circuit board for the transmitter. Remove the battery from the case and replace it with a fresh one. Make sure you use the correct polarity and orientation, or your car may not start.

Typically, dealerships will have the most extensive programming equipment for your car model. They can also provide the most secure option. They might charge you more due to the fact that they have higher overhead costs.

You may be able to locate the replacement at an auto parts shop or online. Consumer Reports found that some off-brand remotes are not compatible with the car's system. A lot of online retailers who sell replacement remotes also require proof of ownership in order to program the new fob. You can request your local dealer or mechanic to do it for you. However, this could cost you more.

Why Go to a Hardware Store for a Key Fob Replacement?

The key fob is a handy little device that allows you to unlock your vehicle and then start it up without needing an actual key. Subaru's key fobs have a number of features that make driving easier and more enjoyable. They can lock and unlock doors and start the engine. They can also unlock the gas cap, and turn on the lights.

The majority of newer cars come with keys that need to be programmed to use it. The manufacturer provides these devices with unique codes that only dealers and locksmiths have access to.

If you are unable to locate or repair your fob, it is best to go to a retailer. They have the software to reprogram blank fobs to work with a specific model. They can also cut you a new key, and then insert it into the fob.

Some online sellers sell keys that are blank and easy to program. They might not be as reliable as ones that come directly from the dealership, however.

The first step is to write down the transmitter's 8-digit number which is located on the top of the door sill on the driver's side. Once you have the first digit in your notebook take your vehicle and press the lock button the number of times it takes to match that number. Continue to do this for the remaining number. After the last digit is entered, you are able to remove the ignition key and listen for a chime on your dash to indicate that the system has been properly programmed.

Why Should You Visit a Subaru Dealership to Replace a Key Fob?

Although a simple key with an attached key cylinder to the car's fender is the norm, many motorists nowadays opt for an electronic key fob that locks, unlocks and in some cases starts their cars. The fobs transmit an electronic signal to the vehicle via multiple antennae. The transponder chip is used to verify that the driver's authorization is valid. This is why most newer models require drivers to visit a dealership to get their fobs replaced, according to Consumer Reports.

It might seem like an inconvenience, but it's more beneficial to visit a dealer. This will ensure that you receive a genuine replacement key fob as well as that your vehicle has been programmed to accept the key fob. The cost of the duplicate or replacement fob could be covered by the warranty of your car and will save you money over the course of.

Before attempting to replace your Subaru key fob battery, check inside the fob to find a small gap in the seam that separates the back and front of the fob (instructions to open the fob can be found in the owner's manual). If you spot this area, pop the fob open with the flat-head screwdriver. Then, take out the old battery and place a 2025-sized battery in its place. Then put the fob back together.