Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you are going attempt to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and uPVC window repair not onto the floor which could cause them to be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap between the door and the window is substantial, you may want to use an alarm system that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems, including sagging. A window repair that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your upvc window repairs near me window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need open the window to get to the frame. With the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws until they remain in position.

If you are unable to move the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity with time, Upvc window Repair leading them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose Upvc window repair handle. The first step is to close the window and perform an experiment fit. The corners of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be put on. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part, hinges can wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do with someone else to help hold the frame in place.

Check that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges may also become misaligned due to wear, creating a gap between the frame and sash. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge side of the window, may also be misaligned, and again it's possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.