UPVC Door Handles Replacement Guide

Replacing upvc door handles is an easy DIY task once you have the correct measurements. These measurements include the distance between the backplate of the handle's fixing centres (sometimes referred to as PZ) and the centre of the key hole.

The most popular uPVC handle has two inline levers. One internal and one exterior, connected via spindles. They are used to operate the multipoint lock found on uPVC and aluminium doors and also on some wooden doors.

Brands & finishes

A broken uPVC handle is more than just a minor inconvenience. It can also leave your home vulnerable to burglars who could make the lock open and gain entry to your property. It is imperative to act immediately you notice your uPVC handles are breaking down.

Fortunately, it is an easy task to replace your uPVC door handles. You'll need just a few tools and few accurate measurements. In most cases, you can simply screw in your new uPVC handles and you'll be ready to go. However, it's a good idea to look for the top quality handles and locks that have the highest security standards.

There are many different kinds of uPVC handles on the market that you can pick from. These include lever/lever, pads, offset and snib handles. Lever/lever handles are popular with homeowners and consist of two inline handles that can be moved. Pad uPVC handles are smaller and come with an offset design. This allows you to secure the outside of your home following entry.

An offset uPVC handle is comprised of a fixed and one movable pad. This type of handle is usually used on sliding patio doors. Snib handles are like offset handles but can be employed on uPVC french doors.

It is important to consider the style of your current windows and doors when selecting a replacement uPVC handle. The handle should be in line with the colour and finish of your existing doors. Certain handles come in a range of finishes, including white and black as well as others that are available in more elegant choices like chrome or gold.

It's important to ensure that you have your screw-to-screw and PZ measurements right when taking your measurements. The PZ measurement is the distance from the centre of the spindle hole to the centre of the keyhole. The screw-to-screw dimension is the distance between the screw hole on your current handle and the closest screw on your door frame and it's crucial to accurately measure this to identify the right replacement.

Measurement and Fitting

The uPVC handle is fitted with two levers - one on each side of the lock mechanism that make it easy to operate both from inside and out. Handles are an important component of the security system on a door. They offer a comfortable grip, and they work without effort. With the correct uPVC handles, you will be able to ensure your door is secure and stylish at the same.

It can be confusing to select the appropriate uPVC handles because there are numerous sizes and shapes available. When choosing a replacement handle for your uPVC door, you should be aware of three crucial dimensions. These are the backplate fixing centers key hole, lever and lever size and the spindle size. Incorporating these factors will make sure that your new handle fits your uPVC door and provides an perfect fit.

Measuring these points is relatively simple but you must be as precise as you can. If you're not careful you may end up with the wrong handle to match the existing one and could cause issues when opening your uPVC door. The most important measurement is the top screw that is on the backplate's fixing centre, often referred to as the PZ size. This is the distance between the axis or handle lever of the keyhole and the central point of the screw. This is usually 92mm however, it could be different.

You should also check that your uPVC door handles have the number of keyspindles required to operate your multi-point locking system. It is ideal that they be in line with the number of keys that you use to lock and unlock your uPVC doors. Some older doors have only one spindle to lock. Modern doors come with two spindles that permit independent operation both inside and outside.

It is not advisable to have a sagging uPVC handle because it puts a lot of stress on the locking mechanism. This could result in broken parts. To avoid this, search for an assortment of uPVC door handles with built-in spring cassettes. They are not just visually appealing, but they will also help give your door locking mechanism a longer time by removing a portion of the force that operates it.

Broken Spring Cassettes

A problem with the tubular latch can result in a stiff door handle. This is usually a straightforward fix and can be resolved by repositioning the fixing plates of your new handle. Open the door and check there aren't any obvious obstructions, such as loose screws or signs that internal components are protruding through the latch plate. If this is not the case, one of the springs inside your uPVC handles might need to move.

A door handle repair kit is the easiest way to accomplish this. The kit will come with all the tools required to take the handles off, and then to reposition the cassettes. Follow the instructions to do this and you'll soon have a sagging or sliding uPVC door handle that is once again fully operable.

A Floppy uPVC handle can be caused by thermal contraction but it's more likely to mean that the gearbox has broken. This isn't something that you can fix at home and will require the assistance of an expert locksmith.

If you need to replace the gearbox on your uPVC door it's important that you purchase an authentic replacement to ensure that everything is fitted correctly. Using an aftermarket part that is less expensive can result in problems, such as the lock being defective or causing less security for your home.

You can also replace the entire uPVC handle and lock mechanism. This will not only fix the issue of sagging, but also ensure that the handle is functional and secure. This is not a cheap or quick fix. It will require the removal of the old aluminium window handles uPVC handles and the replacement with a brand new one. It's also important to note that this is only really suitable for those who have an sprung-handled double glazing door since the bifold door handle replacement will need be repaired. You can also purchase a set of handles with springs built in. This will save your time and money.

Can I install a uPVC Door Handle on an aluminum or timber bifold door handles?

There are many aspects to consider when choosing doors for your house. Aluminum doors are contemporary and stylish while uPVC is durable, energy efficiency and security. In terms of the style of door you want to fit, the right handle is vital. Whether you want to replace your existing handles or add new ones, it's important that you choose the right ones for your property. Our uPVC door handle replacement guide will assist you in making the right decision and install them with confidence.

The process of changing the handle of a uPVC door handle is relatively easy and requires just a few tools. The first step is to take off the handle that was previously in use. This can be accomplished by unscrewing the screws that hold it in place using a screwdriver. After the screws have been removed, you can remove the handle from the composite door handles.

Next, you will need to measure the dimensions of the door handle. To measure this, you'll have to locate the center of the back plate fixing holes. This is commonly called the PZ measurement. It determines the size of the handle spindle. If you are aware of this information, you will be able to purchase a replacement door handle that is of the correct size.

There are several different types of uPVC door handles to satisfy your individual needs. Some of these handles are designed with extra security features, such as anti-drilling protection and cylinder guards as well as mole grips. These uPVC handles can be fitted to uPVC doors and aluminium door handles and wood ones. They are perfect for people who want to improve the security of their home.

There are also uPVC handles that are more traditional. These are available in a variety of finishes, including black, chrome and gold. These handles are typically a little bit more expensive than standard handles, however they will provide a beautiful appearance to your door.

It is important to check the dimensions of your chosen uPVC handle before ordering. You should verify the dimensions above, as well as the lever and keyhole dimension and the backplate mounting centers, to ensure that your new handle is a good one for your door.